4.2-85Nm digital torque wrench - 3/8"" square drive

• For precisely applying a selected torque to components and accessories
• High performance even under intensive use : accuracy of +/- 1% (clockwise) or +/- 2% (counter-clockwise)
• Torque range : 4,2 to 85 Nm
• Resolution : 0.01 Nm
• Compact and lighweight : 29cm / 390g
• 3/8" male square drive
• Bits included : bit bolder, hex bits (2 / 3 / 4 / 5 / 6 mm), Torx® compatible bits (T7 / T10 / T25 / T30)
• Audible and visual signal as the target torque is approached
• Measurement modes : Peak or Track (real-time torque)
• Measurement units : Nm, in.lb, ft.lb, kg.cm
• Comfortable bi-material handle
• Individually numbered and delivered in a case with an ISO 6789 calibration certificate
• Powered by 1 AAA battery (not included)
• Automatic shut-off

WARNING : Your VAR torque wrench is a precision measuring instrument. Please observe the following guidelines to preserve it :

• NEVER use it as a standard ratchet; this will eventually compromise the wrench's accuracy
• NEVER exceed the maximum torque capacity, as this may damage the internal mechanism
• RESET the torque setting to the minimum before storage
• PROTECT it from shocks, dust, and moisture
• Ensure you maintain a properly charged battery (< 1.3 Volts)
• To maintain accuracy and proper operation, torque wrenches should be checked and calibrated every 5,000 cycles or every 12 months